Prime 150 Watt 2-Channel Amplifier R150-2

Placeholder, no image available
Placeholder, no image available

Prime 150 Watt 2-Channel Amplifier R150-2

The PRIME R150-2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150-2 can also run in bridged/mono mode for use with subwoofers.

Read More
1 Review
Discontinued
Overview Specifications Support Accessories Wiring Wizard
Overview

Rockford Fosgate amplification at an unbelievable value. The R150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

FEATURES AT A GLANCE

  • MOSFET power supply
  • 12dB/octave Butterworth crossover
  • 4 Gauge power/ground connections with built-in ATC fusing
  • RCA pass-thru outputs
  • 1 Year Warranty
Technologies
Specifications
Cta-2006 Compliant
Number of Channels
2
Total Power
(Sum of Rated Power)
150 Watts RMS
Rated Power
(RMS Continuous Power)
50 Watts x 2 @ 4-Ohm
75 Watts x 2 @ 2-Ohm
150 Watts x 1 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)
59 Watts x 2 @ 4-Ohms 0° Res
89 Watts x 2 @ 2-Ohms 0° Res
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/-1dB
Input Sensitivity
Circuit Topology Class
Class A/B
Efficiency (average)
60% @ 4-Ohm
54% @ 2-Ohm
Total Harmonic Distortion (Thd+Noise)
Signal Input
Low Level: 1 RCA pair
Signal Output
Low Level: 1 RCA pair
Tone Controls
Punch Bass: 0dB to +12dB @ 45Hz
Crossover Controls
High-Pass (HP): 80Hz @ 12dB/octave Butterworth
Low-Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
Remote Controls
Visual Indicators
Power
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Screw terminal barrier strip
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.40 x 7.67 x 11.54 (in)
6.10 x 19.49 x 29.30 (cm)
Shipping Weight
5.4 Lbs.
(2.45 Kg.)
Compatibility
Support

Knowledge Base Articles


Show all Knowledge Base topics

Ask Our Experts

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Return Authorization Process



Diagnose First

Prior to requesting an RA, try to diagnose the failure. Many products we receive are sent back with No Trouble Found, usually due to incorrect installation. Use our Knowledge Base for troubleshooting assistance.



Contact Customer Support

Please call us during normal business hours at 1-800-669-9899 (option #1) and be prepared with the following information:

  • First and Last Name with complete Shipping Address
  • Product Name (T0D415)
  • Serial Number (12 or 13 digit number)
  • Failure Diagnosis (no output, no power LED, etc.)
  • Scanned copy of Original Receipt emailed to [email protected] (dealer name, purchase date, and item purchased must be legible)
  • Credit/Debit Card (if paying for out-of-warranty claims)
  • No money orders or checks.


Shipping Instructions

When shipping your product, your package MUST have the following information:

  • RA# Printed Outside of Box (as large as possible)
  • Copy of Original Receipt


Shipping Address

Ship your product (UPS or FedEx preferred) to the following:


Rockford/ AJR International
300 Regency DR
Glendale Heights, IL 60139
RA#:_______________________
Accessories
Front View of Complete Installation Kit

8 AWG Complete Installation Kit

RFK8X
read more...
Three Quarter Beauty Shot of Positive-Negative Battery Terminal

4 AWG Positive/Negative Battery Terminal

RFDB4
read more...
Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended BRIDGED/MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

FAQ

Determining power needed for speakers

Prevent blowing your subwoofers

Temperature differences between subwoofer voice coil types

Differences between SVC and DVC subwoofers

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

FAQ

Determining power needed for speakers

Prevent blowing your subwoofers

Temperature differences between subwoofer voice coil types

Differences between SVC and DVC subwoofers

Reviews

Bang for your bucks

I have a Acura integra hatch 3 door.I just set up a new system"time for an upgrade" I purchased a Prime R150-2. And a R.F. 10 woofer to go with it. Upgading a piece at a time. Figured I would get another ten later.To my surprise that amp and woofer kick harder then the two tens I had be For. And it sounds better. Think I'll be looking at buying another PRIME 150-2. Makes my Acura shake the ground.

4.0

1 Review
Write a Review

Be first to hear about the latest products.

Sign up for product updates.