Punch 8" 300-Watt Powered Enclosure P300-8P
Punch 8" 300-Watt Powered Enclosure P300-8P
The Punch P300-8P is an "all in one" solution for dropping Bass in any factory or aftermarket system. This model features an 8" high output woofer with a 300-watt internal amplifier in a slim design enclosure that's great for truck and small car applications. The enclosure features quick release input and power connectors for easy removal when extra space is required.
Notify Me When Back In Stock:
The Punch 300-8P is a self-contained subwoofer enclosure with built-in amplifier. This "all in one" solution is great for systems that need extra Punch on the low-end of the frequency spectrum. The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier that features a low-pass crossover, bass EQ and phase switch. The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems. It also features an intelligent auto turn-on/off circuit that eliminates the need for a separate turn-on wire. The enclosure itself is precision designed and constructed using MDF (Medium Density Fiberboard) for the best acoustical properties and covered with heat activated vinyl finish to resist marks.
FEATURES AT A GLANCE
- Optimized 8" Low Impedance Woofer
- Intelligent auto turn on/off function
- On Board Phase Switch
- High-Efficiency, Low Current Amplifier Design
- Quick Input Connections for Easy Removal
- Adjustable 12db/Octave low pass crossover
- Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish
- Slim Design For Truck Applications
- On Board Adjustable Bass EQ
- 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design
- Separate low level and speaker level inputs
- Robust Power/Ground connections
- Thermal and over/under voltage protection
- 1 Year Warranty
- Remote bass level control included
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards.
Learn more
CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards.
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Learn more
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
Learn more
Klippel Verified
Klippel is a speaker certification program allowing us to deliver the best possible subwoofers.
(Watts RMS)
12dB/Octave Butterworth
0 dB to +12 dB;
Replacement Part: 1130-59232-01
DC Offset Sense
Audio Sense
Low-Level (RCA)
Replacement Part: 1130-59232-01
High-Level: 300 mV to 12 V
Replacement Part: 1130-59232-01
REM: 18 AWG
Box H x W x D
Wedge H x W x D1 x D2
289 mm x 448 mm 141 mm
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
Reviews
Slams Compact Car!
I have the P300-8P in a 1990 Volkswagen Jetta. Very simple system with original 4 speaker placement with 3.5" in dash. 5.25" in rear deck, all with bass blocker caps to pull out heavy excursion. No amps, only the 20x4 watt deck unit. P300-8 with rubber isolation mounted under rear deck, up-firing and running full-range on the x-over, maybe 1/4 gain. Pulling full range signal from hi-level rear speaker leads before the bass blocker caps. Using "Auto Sense" start. Had to run 8ga power from battery and that's it. Absolute unbelievable simplistic sonic bliss! Having the same amplification system that runs their 12", but inside the eight cabinet makes that driver follow directions to the letter T. Couldn't be happier with the build quality and performance of this sub cabinet.
5.0
Write a ReviewBe first to hear about the latest products.
Sign up for product updates.