1,000 Watt Class-D Full-Range Mono Amplifier P1000X1D

1,000 Watt Class-D Full-Range Mono Amplifier P1000X1D

The Punch P1000X1D is an efficient mono amplifier producing 1,000 Watts into a 1-Ohm or 2-Ohm load without excessive pull on the electrical system. The frequency response of the P1000X1D is optimized for mid-bass and subwoofers.

Read More
0 Reviews
Discontinued
Overview

The P1000X1D 1,000 Watt full-range mono amplifier is versitle enough to run as a dual-mono system (one amplifier for front-left speakers and one amplifier for front-right speakers) or just for subwoofers. This amplifier has on-board Punch Bass to provide low frequency "boom" and features an infrasonic filter to keep damaging inaudible frequencies from damaging your subs.

FEATURES AT A GLANCE

  • MOSFET power supply
  • Top mounted controls
  • 0°/180° Phase Switch
  • Top Mounted LED Indicators
  • 24dB/octave crossover
  • Cast aluminum heatsink
  • MOSFET output stage
  • 4 Gauge power/ground connectors
  • RCA pass-thru outputs
  • Infrasonic filter
  • 1 Year Warranty
Technologies
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
Full-Range Class-D

A full-range version of the Class-D topology which is a high efficiency amplifier design that reduces ...

Learn more
Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more
DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
1000 Watts RMS
Rated Power
(RMS Continuous Power)
500 Watts x 1 @ 4-Ohm
1000 Watts x 1 @ 2-Ohm
1000 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCube®)
574 Watts x 1 @ 4-Ohms
1099 Watts x 1 @ 2-Ohms
Bridgeable
No
Frequency Response
10Hz - 500Hz +/-3dB
Input Sensitivity
Circuit Topology Class
Class D
Efficiency (average)
90% @ 4-Ohm
90% @ 2-Ohm
Total Harmonic Distortion (Thd+Noise)
Signal Input
Input Switch: Hi/Low level input
Low Level: 1 RCA Pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
0dB to +18dB @ 45Hz
0°/180° Variable Phase
Crossover Controls
Low Pass: 50Hz - 500Hz @ 24dB/Octave
Infrasonic: 25Hz @ 24dB/Octave
Remote Controls
Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2)
Visual Indicators
Power
Thermal
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
12 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.2 x 8.1 x 10.7 (in)
5.6 x 22.6 x 27.2 (cm)
Shipping Weight
9.2 Lbs.
(4.17 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10



Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.